The sponge does a good job of conforming to … 4. I hope you found this post helpful! Make sure to pin it for later! So, after hours and hours of stripping and sanding (except for the first step), this is what the hallway and staircase look like. Sanding is best kept for small projects unless you want to hire an industrial sander to remove paint and varnish from your floor. This removed any last bits of paint and dirt but left the wood quite rough, so we sanded the whole area again with 120 grit sandpaper in order to achieve a smooth and paintable finish. Using paint stripper on rounded surfaces and tight areas is often easier and more effective than sanding. With a single-stage paint, you’ll notice the color of the paint in the sanding residue which is normal. The next step is to continue sanding with medium sandpaper, range from 80 to 100 grit. Many brands have minimal fumes and … I still prefer sanding but when I need to strip paint or stain off a flat surface, I’ll use paint remover/stripper. video: Be sure to watch my YouTube video on how sanding versus stripping furniture! After scraping, wet-sand chalking or rough areas, and smooth chipped areas with a medium- or coarse-grit sanding sponge. There are three ways of removing paint from wood: sanding, using a hot air gun and chemical paint strippers. More from my site. Always pre-soak the sandpaper, ensure the area is wet and work evenly across the surface. It’s easy to learn how to strip paint from wood with a paint strippers and removers, but keep them away from your skin, eyes and lungs. Sand Off Paint Process. Sand the walls with a sanding block wrapped in 120-grit sandpaper. Rinse the area, removing any sanding material and move up to 1500 grit sandpaper, again using the same process. Then, vacuum the sanding area with the shop vac to see the first result of the sanding process. A quick word about sandpaper and wire wool, both of which can cause damage to wood unless you take it easy… It is better to use coarse 60-grit sandpaper to start the sanding with the orbital sander that moving over a large area at a time. Apply a coat of oil-based paint to the walls using a roller.